If you want to reproduce the highest quality low bass in a very compact package application, the 10W6v3 is the ultimate choice. This advanced subwoofer features several technologies shared with the flagship W7AE subwoofers to provide strong advantages in motor linearity and spring response. In combination with a very efficient cooling circuit, these ensure reduced distortion and excellent dynamic balance.
The 10W6v3 is best used with an amplifier power in the 200W - 600W range and is optimized for operation in a sealed package at only 0.55cu. ft. (15.6 L) of airspace or 0.75 cu. ft. (21.2 L) body with port. See the Specifications tab for detailed package recommendations.
Larger excursion capability and higher power handling distinguish it from our 10W3v3 10 inch subwoofer, which enables higher output. Dual 4 voice coils allow the W6v3 to be used in either a 2 Ω or 8 ohm configuration.
Free Air Resonance (Fs) |
30.12 Hz |
Electrical “Q” (Qes) |
0.543 |
Mechanical “Q” (Qms) |
9.228 |
Total Speaker “Q” (Qts) |
0.513 |
Equivalent Compliance (Vas) |
0.821 cu ft / 23.25 L |
One-Way Linear Excursion (Xmax)* |
0.75 in / 19 mm |
Reference Efficiency (no) |
0.11% |
Efficiency (1 W / 1 m)** |
82.7 dB SPL |
Effective Piston Area (Sd) |
49.303 sq in / 0.0318 sq m |
DC Resistance (Re)*** |
6.452 Ω |
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.
*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same.
|