The Musway DSP amplifier set for the Scania from Bj. 2017 amplifies the Scania premium speakers in the door and in the A-pillar. It is important that the low-midrange speaker in the door shimmers on the membrane when you shine through the grille! The center loudspeaker remains untouched in all modules, as it reproduces traffic information, telephone, navigation announcements and the emergency call assistant.
It can be assembled modularly. A setup is available in the course of installation or via online PC tool help from me.
ON-SITE installations are possible for a fee and travel expenses replacement within Austria. The prerequisite is that the installation takes place in a covered, heated truck garage.
module 1
is purely the DSP amplifier where a subwoofer 4 ohms or 2 x 2 ohms can be operated.
The optional subwoofer housing can then be accommodated in the right-hand storage compartment.
module 2
is the DSP amplifier plus subwoofer housing
module 3
is the DSP amplifier plus subwoofer housing and the broadband speaker with aluminum pod on the A-pillar
In this variant, the speaker extension is installed for much better localization and music details. A door insulation is absolutely necessary!
The broadband loudspeakers are closed with a special passive crossover between the tweeter leads.
module 4
would then be an additional amplifier for an even more powerful subwoofer plus upgrade of the door 165 mm loudspeaker with additional sound generator for the Lane Keeping Assist.
In all modules, a bass level remote control or Bluetooth streaming module can also be coupled to the Musway amplifier.
6 x 70/105 watts RMS @ 4/2 Ω or 3 x 210 watts RMS @ 4 Ω bridged
6 x high level input 4.8 - 20 V RMS with EPS
6 x low level input* (RCA) 2-6V RMS 1 x AUX-in/Stereo (RCA) 2-6V RMS
1 x optical input/stereo PCM 192 kHz / 24 bit 6 x speaker output amplified
2 x preamp output/RCA (configurable via DSP)
Dimensions: 150 x 44 x 220 mm * only with optional MPK-RCA6/MPK-RCA6-PP cable set
Dual 32bit, 330MHz DSP technology controllable via PC software or APP
• Burr-Brown converter (PCM3168A) and Analog Devices DSP (ADAU1452)
• Intelligent high level input (Error Protection System)
• Automatic switch-on function, start-stop ready
• Soft clipping (power reduction) in 2 Ω operation
• Signal-to-noise ratio ≥90dB, frequency response 15 Hz – 22 kHz (-3dB)
• THD ≤0.1% (1 kHz, 4Ω, 90% power), clipping LED
• Separately adjustable input sensitivity (channel 1-4, channel 5-6, AUX
• Plug+Play with vehicle-specific cable sets
• QUICK CONNECT terminal for all MUSWAY 2+2 Ω subwoofer systems
Optional accessories BTA2:
External Bluetooth® USB dongle for audio streaming & app control
BTS-HD: External Bluetooth® USB dongle for Full HD audio streaming
BTS: External Bluetooth® USB dongle for audio streaming
DRC1: Digital remote control for controlling various DSP functions
Unfortunately there are no review yet. Be the first who rate this product.